-
It can realize full-automatic wire cutting and stripping, single-end crimping, and the other end of wire A is stripped and tinned, and wire B is crimped to the terminal.
-
The shortest length of the harness can be 40mm, and the special length can be customized. If the length exceeds 800mm, a conveyor belt needs to be installed.
-
Both horizontal and straight clamping dies can be used, and can be quickly replaced.
-
The translation, cutting and stripping modules are controlled by servo motors, with high accuracy and stable equipment.
-
The standard 2.0T ultra-silent terminal press has good stability and low failure rate.
-
It is equipped with air pressure detection, terminal material shortage detection, wire material shortage and knot detection, and temperature abnormality detection.
-
Japanese SOL Solu pressure management system can be selected to analyze the terminal crimping effect and trigger the bad shutdown alarm.
-
Equipped with waste collection device to facilitate the collection of terminal waste and wire stripping waste.
-
Human-machine interface digital control, easy to learn and understand, easy to learn and skilled to operate.
|
model Model |
ZM-038HS2 | ZM-038HS2 |
|
function Function |
Complete one end of the two wires and press (press) them on the same terminal, and the other end is peeled and tinned |
Finish one end of the two wires and hit (combined pressure) on the same terminal, the other end of the peel and dip tin |
|
capacity Capacity |
2000 pieces/hour | 2000 pcs/h |
|
Applicable wire diameter range Applicable wire diameter range |
AWG24#-AWG12# | AWG24#-AWG12# |
|
Cut length Cut length |
35-3000mm |
35-3000mm |
|
Cutting accuracy Cut precision |
± 0.5mm + L * 0.2% | ± 0.5mm + L * 0.2% |
|
Pressing capacity Crimping capacity |
2.0 T | 2.0 T |
|
Power Supply Power Input |
AC 220V 50/60Hz AC 380V 50/60Hz |
AC 220V 50/60Hz AC 380V 50/60Hz |
|
air pressure Air supply |
0.6-0.8MPA(Use dry and clean air) | 0.6-0.8MPA(Dry and clean air is required) |
|
power Power consumption |
2000W | 2000W |
|
Detection device Detect Device |
|
|
|
Appearance dimension Dimension |
L1450*W750*H1860(mm) | L1450*W750*H1860(mm) |
|
Motor part Motor section |
INVITON Motor Self-developed terminal machine motor and reducer three-phase motor Stepper motor |
invt Motors Self-developed terminal motors and gearboxes three-phase motors Stepper motor |
|
Mechanical parts Mechanical components |
Taiwan silver guide rail, Taiwan silver wire rod | THK guide rail; THK screw bar; |
|
Pneumatic components Pneumatic Components |
Yadeke pneumatic connector YADECO/SMC cylinder SMC pressure regulating valve (set) barometer SMC air valve SMC filter Taiwan Prestar Gas Pipe |
Adecco valve, Adecco/SMC cylinder, SMC regulator (set) air pressure gauge, SMC valve, SMC filter, Taiwan Pusta air hose |
|
Electronic components Electronic Components |
Taiwan Skyworth touch screen (color screen) Omron sensor Schneider/Chint circuit breaker Schneider/Chint leakage switch Taiwan Mingwei power switch Ancore fiber amplifier |
Taiwan Skyworth touch screen (color screen) Omron sensor Schneider/Chint Circuit Breaker Schneider/Chint Leakage Switch Taiwan Meanwell Power Switch Encore Fiber Amplifier |
|
Quality inspection system Quality Inspection System |
Japan Solu Pressure Management System Self-developed servo pressure management system Terminal appearance inspection system |
Japan Solu Pressure Management System Self-developed pressure management system Terminal appearance inspection system |
|
Terminal blade Terminal Blades |
self-control | Homemade |
|
Other parts Others |
Self-made or outgoing | Homemade / Outsourced |
