-
Multi-line cutting, peeling, crimping terminal, threading rubber shell, twisting wire stained with tin at the same time.
-
The production efficiency is 600 cycles/hour, and can be more than one for different rubber shells, up to 1800 pcs/h.
-
Pull-type wire feeding adopts servo control, and the wire length can be accurate to 0.01mm
-
It is suitable for 2P-12P multiple electronic wires to end and insert rubber case, and is suitable for 1.0, 1.25, 2.0, 2.54 and other terminals.
-
The CCD visual inspection system can be added to detect the defective rubber shell and color order.
-
Japan Solu pressure management system can be added to detect poor crimping of terminals.
-
The Ethernet bus controller is adopted to greatly reduce the communication time and improve the production efficiency by 50%.
-
The defective products will be separated automatically if the rubber shell is inserted or crimped abnormally.
-
Human-machine interface digital control tangent peeling precision to 0.01, electronic wire color arbitrary match, powerful and flexible transformation.
-
With high-quality components, the rubber shell insertion machine has stronger performance, higher precision and longer service life.
|
model Model |
ZM-058HS | ZM-058HS |
|
function Function |
Full-automatic multi-wire cutting and stripping, terminal crimping, tinning of twisted wire, insertion of rubber shell |
Simultaneous cutting, stripping, crimping, rubber casing, twisting and tinning of multiple wires |
|
capacity Capacity |
750pcs/hour | 750pcs/h |
|
Applicable wire diameter range Applicable wire diameter range |
AWG30#-AWG18# | AWG30#-AWG18# |
|
Cut length Cut length |
40-800mm | 40-800mm |
|
Cutting accuracy Cut precision |
± 0.5mm + L * 0.2% | ± 0.5mm + L * 0.2% |
|
Pressing capacity Crimping capacity |
2.0 T | 2.0 T |
|
Power Supply Power Input |
AC 220V 50/60Hz AC 380V 50/60Hz |
AC 220V 50/60Hz AC 380V 50/60Hz |
|
air pressure Air supply |
0.6-0.8MPA(Use dry and clean air) | 0.6-0.8MPA(Dry and clean air is required) |
|
power Power consumption |
2.5KW |
2.5KW |
|
Detection device Detect Device |
|
|
|
Appearance dimension Dimension |
L1330*W900*H1860(mm) | L1330*W900*H1860(mm) |
|
Motor part Motor section |
INVITON Motor Self-developed terminal machine motor and reducer three-phase motor Stepper motor |
invt Motors Self-developed terminal motors and gearboxes three-phase motors Stepper motor |
|
Mechanical parts Mechanical components |
Taiwan silver guide rail, Taiwan silver wire rod | THK guide rail; THK screw bar; |
|
Pneumatic components Pneumatic Components |
Yadeke pneumatic connector YADECO/SMC cylinder SMC pressure regulating valve (set) barometer SMC air valve SMC filter Taiwan Prestar Gas Pipe |
Adecco valve, Adecco/SMC cylinder, SMC regulator (set) air pressure gauge, SMC valve, SMC filter, Taiwan Pusta air hose |
|
Electronic components Electronic Components |
Taiwan Skyworth touch screen (color screen) Omron sensor Schneider/Chint circuit breaker Schneider/Chint leakage switch Taiwan Mingwei power switch Ancore fiber amplifier |
Taiwan Skyworth touch screen (color screen) Omron sensor Schneider/Chint Circuit Breaker Schneider/Chint Leakage Switch Taiwan Meanwell Power Switch Encore Fiber Amplifier |
|
Quality inspection system Quality Inspection System |
Japan Solu Pressure Management System Self-developed servo pressure management system Terminal appearance inspection system |
Japan Solu Pressure Management System Self-developed pressure management system Terminal appearance inspection system |
|
Terminal blade Terminal Blades |
self-control | Homemade |
|
Other parts Others |
Self-made or outgoing | Homemade / Outsourced |
