-
Multi-line automatic simultaneous cutting, peeling, double-end crimping terminal, double-end rubber case insertion.
-
适合2P-12P multiple electronic wires are terminated and inserted into the rubber case,Applicable to terminals 1.0, 1.25, 2.0, 2.54, etc。
-
The CCD visual inspection system can be added to detect the defective rubber shell and color order.
-
Japan Solu pressure management system can be added to detect poor crimping of terminals.
-
The total width of the rubber shell is less than 45mm, which can adapt to more than one, and the efficiency is * 2 or * 3.
-
High-end servo motor is used to greatly reduce communication time, improve production efficiency by 50%, and the third-generation equipment can reach 600 pcs/h.
-
The defective products will be separated automatically if the rubber shell is inserted or crimped abnormally.
-
Human-machine interface digital control tangent peeling precision to 0.01, electronic wire color arbitrary match, powerful and flexible transformation.
-
With high-quality components, the rubber shell insertion machine has stronger performance, higher precision and longer service life.
|
model Model |
ZM-058H | ZM-058H |
|
function Function |
Wire cutting, single/double end peeling, single/double terminal, single/double end rubber case |
Wire cutting, single/dual end stripping, single/dual punching terminal, single/dual end inserting rubber case |
|
capacity Capacity |
450 cycles/h（200mm 10Pin） | 450pcs/h（200mm 10Pin） |
|
Applicable wire diameter range Applicable wire diameter range |
AWG30#-AWG18#（Special harness customization） | AWG30#-AWG18#（Special harness customization） |
|
Cut length Cut length |
40-800mm | 40-800mm |
|
Cutting accuracy Cut precision |
± 0.5mm + L * 0.2% | ± 0.5mm + L * 0.2% |
|
Pressing capacity Crimping capacity |
2.0 T | 2.0 T |
|
Power Supply Power Input |
AC 220V 50/60Hz AC 380V 50/60Hz |
AC 220V 50/60Hz AC 380V 50/60Hz |
|
air pressure Air supply |
0.6-0.8MPA(Use dry and clean air) |
0.6-0.8MPA(Dry and clean air is required) |
|
power Power consumption |
2500W | 2500W |
|
Detection device Detect Device |
|
|
|
Appearance dimension Dimension |
1700*1900*1600 mm | 1700*1900*1600 mm |
|
Motor part Motor section |
INVITON Motor Self-developed terminal machine motor and reducer three-phase motor Stepper motor |
invt Motors Self-developed terminal motors and gearboxes three-phase motors Stepper motor |
|
Mechanical parts Mechanical components |
Taiwan silver guide rail, Taiwan silver wire rod | THK guide rail; THK screw bar; |
|
Pneumatic components Pneumatic Components |
Yadeke pneumatic connector YADECO/SMC cylinder SMC pressure regulating valve (set) barometer SMC air valve SMC filter Taiwan Prestar Gas Pipe |
Adecco valve, Adecco/SMC cylinder, SMC regulator (set) air pressure gauge, SMC valve, SMC filter, Taiwan Pusta air hose |
|
Electronic components Electronic Components |
Taiwan Skyworth touch screen (color screen) Omron sensor Schneider/Chint circuit breaker Schneider/Chint leakage switch Taiwan Mingwei power switch Ancore fiber amplifier |
Taiwan Skyworth touch screen (color screen) Omron sensor Schneider/Chint Circuit Breaker Schneider/Chint Leakage Switch Taiwan Meanwell Power Switch Encore Fiber Amplifier |
|
Quality inspection system Quality Inspection System |
Japan Solu Pressure Management System Self-developed servo pressure management system Terminal appearance inspection system |
Japan Solu Pressure Management System Self-developed pressure management system Terminal appearance inspection system |
|
Terminal blade Terminal Blades |
self-control | Homemade |
|
Other parts Others |
Self-made or outgoing | Homemade / Outsourced |
